Understanding the Effects of Hydrogen on SCC of Pipelines

A thesis submitted in Department of Chemical and Materials Engineering University of Alberta, © Zeynab Shirband, 2016.

Near-neutral pH stress corrosion cracks (NNpH SCC) are developed under coating disbondments on the external surface of pipelines where the surface of pipeline is exposed to the soil solution. NNpH SCC initiation and early stage of growth is mainly governed by the dissolution process of steel. …This study aimed at understanding the contribution of these important factors to NNpH SCC. In this study, the role of coating disbondment on hydrogen ingress into pipeline steels and the effects of mill-scale and hydrotesting on NNpH SCC crack initiation are investigated.

Read more

Abrasive Wear Failure Analysis of Tungsten Carbide Hard facing on Carbon Steel Blade

This content has been downloaded from IOPscience, Series: Materials Science and Engineering 165 (2017),

This study investigate the abrasive wear failure of tungsten carbide hardfacing on continuous digester (CD) blade (carbon steel) in an environment of sulphuric acid and ilmenite ore mixture. Comparison being made on the hardness, thickness and microstructural of the hardfacing between unworn and 3 months old worn blade on few locations around the blade. The cross sections of the blade revealed non-uniform coverage of the hardfacing on the blade for both worn and unworn blade. The edge of the blade has the least amount of hardfacing thickness which with time acts as the point of failure during the wear process. The hardness obtained from both the unworn and worn samples are around 25% lower from the hardfacing electrode manufacturer’s hardness specification. Microstructural micrograph analysis of the hardfacing reveale

Read more

Une base de données « Matériaux – Fatigue » au Cetim

cetim_donnee_fatigue_materiaux

Les industriels de différentes professions (Transmissions mécaniques, Machinisme agricole et Moteurs compresseurs) ont souhaité avoir une base de données en fatigue pour un certain nombre de matériaux.

Les caractéristiques mécaniques statiques et de fatigue sont 17reportées pour chaque matériau sous forme de fiches. Ces fiches permettent ainsi à l’utilisateur un accès rapide à l’information et peuvent être utilisées dans le cadre du dimensionnement en fatigue de ses pièces.

Source : Données « Matériaux – Fatigue » – Cetim – Centre technique des industries mécaniquescetim_cotenu-reserve-cotisants

Concerns of corrosive effects with respect to lightning protection systems

An interesting  paper published in  » Engineering Failure Analysis » on www.sciencedirect.com, Volume 57, November 2015.

Lightning protection system elements need to be selected from materials which are resistant to corrosion and should be protected from fast degradation. However, over the time corrosion will take place in the presence of galvanically dissimilar metals in the same electrolyte (moisture)……

This paper presents the causes of corrosion and recent developments in minimising the corrosion associated with lightning protection and grounding systems.

Read more

Déjouez les pièges de la corrosion à Toulouse le 18 mai

Une « Journée Technique » du Cetim à Toulouse le 18 mai.

La corrosion reste un mal industriel majeur. Et ce, en dépit des avancées scientifiques et des progrès technologiques continus. Elle est encore aujourd’hui responsable d’un grand nombre d’avaries et touche de nombreux domaines.Elle revêt différentes formes et un cas apparemment simple peut cacher un phénomène complexe. Ses causes étant multiples, sa détection, sa mesure et sa maîtrise relèvent de compétences variées qui en font une affaire de spécialistes !

Ayez les bons réflexes et venez profitez de l’expertise du Cetim à l’occasion de cette journée, qui vous aidera à déjouer les pièges de la corrosion.

Pour savoir plus et s’inscrire : Journees-techniques/Corrosion

Fatigue Failure Analysis of a Cooling Fan Blade

A paper published in  » Engineering Failure Analysis » on www.sciencedirect.com.

Fatigue failure of holding U-bolt of a cooling fan blade is analyzed. Fractography of the fracture surface reveals the characteristics of a fatigue fracture. Finite element modeling is used for stress analyzing. Analysis of the loading conditions indicates that the bolts are under multiaxial fatigue. ……..

Read more

Multiscale fracture of cellular materials

A paper published in « International Journal of Terraspace Science and Engineering« , 2016.

This paper presents a review of mode I fracture toughness obtained by authors from micromechanical modeling and fracture toughness test……… The mode I fracture toughness was determine using three different specimens (Single Edge Notch Bending, Single Edge Crack and Asymmetric Semi Circular Bending). Different Polyurethane foam densities were investigated. Finally, a good correlation between analytical, numerical and experimental fracture toughness results was obtained.

Read more

Ruptures d’arbres épaulés clavetés (3)

Avatar Cas ConcretsUn précédent article «Vintage» faisait état d’une règle pratique de positionnement établie au Cetim en 1977. Quatre fiches « Cas Concrets » illustraient cet publication. Cinq autres fiches sont venus précédemment compléter cet article.

Voici les trois dernières fiches «Cas Concrets» d’arbres épaulés clavetés rompus en fatigue. Elles avaient été publiées dans le numéro 55 d’avril 1978 de Cetim-Informations.

telecharger le doc

 

Vintage – Règle pratique du positionnement des rainures de clavetage

Vintage Clavettes_arbres_epaulesRetrouver dans la Mécatech, du Cetim, dans la série « Vintage », un article sur le bon positionnement des rainures de clavette sur les arbres épaulés clavetés. Il est illustré de nombreux « Cas Concrets ».

Les différents articles de cette série «Vintage» ont été publiés dans la revue Cetim Informations dans les années 74 à 90. Bien qu’ils soient anciens, le contenu de ces articles est toujours d’actualité… Ils viennent en complément de la série «Cas concrets» consacrée à des fiches d’analyses de défaillances.

Failure analysis of a bridge crane shaft

A paper published in « Case Studies in Engineering Failure Analysis » on april 2014.

Failure analysis of a shaft used in a bridge crane has been carried out. The shaft fractured in the keyway with evidence of fatigue. The geometry of the keyway also promoted the initiation crack because the width and height were erroneously designed. It was concluded that all these factors produced fatigue failure.

Read more